Blog
Rentals
Locations
(Corner of Hwy 1 & Hwy 8 North)
M: 8:00-5:00
T: 8:00-5:00
W: 8:00-5:00
T: 8:00-5:00
F: 8:00-5:00
S: 8:00-2:00
Product Information
The RDX-110 tractor mount snow blower uses a rotating drum that allows snow to be ejected from left, right, or through the center chute. The ability to eject snow from the left or right of the fan housing increases efficiency. The drum uses a high molecular plastic bearing material to ease rotation and prevent freezing.
On both the RDX-110 & SDX-110, a 1000 RPM, 250 HP gear driven drive system is standard. A heavily reinforced 23” bottom auger with formed struts ensures that hard chunks of snow and ice are fed into the fan with ease. This large open bottom auger also allows the snow blower to cut into hard pack snow where other snow blowers have difficulty.
Contact Us Quote Request Similar InventoryFeatures
-
5 Paddle Fan
-
Open Auger with Formed Struts
-
Double Chute Deflector
-
Hydraulic Chute Rotator & Motor
-
High Grade Steel
-
UHMW
-
Skid Shoes
-
Heat Treated Fan Shaft
-
Idler Sprocket
Specs
| Cutting Width | 117" | 117" |
| Cutting Height | 45-1/2" (1156mm) | 45-1/2" (1156mm) |
| Bottom Auger Diameter | 23" (584mm) | 23" (584mm) |
| Top Auger Diameter | 14" (357mm) | 14" (357mm) |
| Fan Diameter | 38" (965mm) | 38" (965mm) |
| Fan Type | 5 paddle cupped style | 5 paddle cupped style |
| Weight | 3085lbs (1400kg) | 2750lbs (1247kg) |
| PTO Speed | 1000 RPM | 1000 RPM |
| Auger Drive Chain | #80 | #80 |
| Capacity - Dry Snow / Wet Snow | 837 tons/hr / 263 tons/hr | 762 tons/hr / 249 tons/hr |
| HP Requirement | 140-220 HP (104 - 149KW) | 140-220 HP (104 - 149KW) |
- Cutting Width
- Cutting Height
- Bottom Auger Diameter
- Top Auger Diameter
- Fan Diameter
- Fan Type
- Weight
- PTO Speed
- Auger Drive Chain
- Capacity - Dry Snow / Wet Snow
- HP Requirement
-
RDX-117
- 117"
- 45-1/2" (1156mm)
- 23" (584mm)
- 14" (357mm)
- 38" (965mm)
- 5 paddle cupped style
- 3085lbs (1400kg)
- 1000 RPM
- #80
- 837 tons/hr / 263 tons/hr
- 140-220 HP (104 - 149KW)
-
SDX-117
- 117"
- 45-1/2" (1156mm)
- 23" (584mm)
- 14" (357mm)
- 38" (965mm)
- 5 paddle cupped style
- 2750lbs (1247kg)
- 1000 RPM
- #80
- 762 tons/hr / 249 tons/hr
- 140-220 HP (104 - 149KW)
